Specifications

203
Analog Matrix
Introduction
MegaPower 3200 and MegaPower 48 Plus analog matrices can be added to victor site manager.
They can be added to Virtual Matrix profiles so they can be controlled from a particular workstation
via an attached keyboard.
A typical analog matrix configuration will have video feeds to the matrix coupled to a recorder
which may already be part of the victor system. In this setup the virtual matrix crates mappings to
both the recorder camera and the analog matrix input.
The camera mappings are also required to allow playback from keyboard ‘Orange Buttons’. When
the user selects a camera associated with the analog matrix, mappings allow the virtual matrix to
identify the associated recorder and take appropriate action to retrieve video.
Analog Matrix Editor
You edit many properties of analog matrices via victor.
Basic properties are configured in the General and Analog Matrix Setup sections.
The Workstation Connections section is used to configure COM Port, Baud Rate and Playback
Monitor specific settings for each workstation matrix connection. Remote workstations can be
dragged and dropped here from the device list.
The Inputs and Analog Matrix Configuration section of the editor is used to configure camera
mappings.
To configure camera mappings, cameras already present in victor are dragged from the device list
on to the Camera Mapping list. The sequence of the list can be changed using the Delete, Up and
Down buttons.