Specifications

Generic Edge Devices and Reports
186 victor 4.4 Installation and Configuration Guide
Import Generic Exception Reports
The Generic Exception Report wizard guides you through the several steps required to import a
new exception report and also create report templates. Templates are useful as the next time you
import a report of that type, victor will recognize it and import it directly.
Procedure 28-1 
Import Generic Exception Reports
Step Action
1 Select Exception Reports from the Build tab
2 Select Import Report. Exception Report Import Wizard displays
3 Select Browse. Open dialog displays
4 Navigate to and select the exception report
5 Select Open. A Report Preview displays in the File Select screen
6 Select Generic Edge Devices or Cameras from the Type dropdown
7 Use the Report Type dropdown to select whether the report is new or uses an existing
template. If New Report Type is selected, the wizard will guide you through the rest of the
process, if you select an existing report type, the wizard will bypass report configuration
and prompt for import
8 Select Next. Exception Report Header screen displays. Set the report header by
selecting the row containing the required column headers. After selecting the header row,
you can change the column header names by selecting the name in the preview area and
entering a new name
9 Select Next. Mandatory Columns screen displays
10 Drag column headers from the preview datagrid into the relevant column dropboxes.
11 Select Next. Save Format screen displays:
• Enter New Report Name (Select Save when entered) - The new template will
save with this name
• Enter an External Device Time Offset if required
Note
This setting allows you to adjust for differences between the External device Clock
and the Video System Clock so report time data and Video data align.
12 Select Next. Import Summary Screen displays. Review the report summary and use
Previous and Next Buttons to make any amendments as required
13 Select Finish
The report can be accessed from Build Tab > Exception Reports > Show All. Right click the
report and select View, Send To or Delete as required
- End -