Specifications

Point of Sale
182 victor 4.4 Installation and Configuration Guide
Import POS Exception Reports
The POS Report Import wizard guides you through the several steps required to import a new
report and also create a report template. Templates are useful as the next time you import a report
of that type, victor will recognize it and import it directly.
Procedure 27-8 
Import POS Exception Reports
CautionCaution
Before importing POS data into victor you should remove or securely obscure any sensitive credit
card information. The victor unified client has not been certified for PCI DSS compliance.
Step Action
1 Select Report from the Build tab
2 Select Import Report. Exception Report Import Wizard displays
3 Select Browse
4 Navigate to and select the exception report
5 Select Open. A Report Preview displays. Use the Report Type dropdown to select New or
Existing. If it is a new report type, the wizard will guide you through the rest of the process,
if you select an existing report type, the wizard will bypass report configuration and prompt
for import.
6 Select Next. Exception Report Header screen displays. Set the report header by
selecting the row containing the required column headers. After selecting the header row,
you can change the column header names by selecting the name in the preview area and
entering a new name.
7 Select Next. Mandatory Columns screen displays. Drag column headers from the
preview datagrid into the relevant column dropboxes.
8 Select Next. Additional Info screen displays. If your exception report groups exceptions
underneath header rows, select a header row from the preview datagrid and then select a
property header from the property table.
9 Select Next. Save Report Template screen displays:
• Enter New Report Name (Select Save when entered) - The new template will
save with this name
•Select Enable Customer Filtering if required. This means you can filter POS
Exception Reports based on whether a customer was present at the time of the
exception or not.
Note
Customer Present Video Intelligence is a VideoEdge NVR 4.4+ licensed add-on.
In order to use this feature, a license must be purchased for each camera.
• Enter a Time offset if required
10 Select Next. Import Summary Screen displays. Review the report summary and use
Previous and Next Buttons to make any amendments as required.
11 Select Finish.