Specifications

Keyboards
154 victor 4.4 Installation and Configuration Guide
Note
1. When using a system keyboard, commands can only be sent if the surveillance window has
focus. Other keyboards are not affected and will continue to operate whether the surveillance
window has focus or not.

2. System keyboards cannot be edited from remote clients.
3. Repeat should be set to ‘Off’ for all keyboards. Refer to your keyboard’s manual for instructions.
Add an AD/Pelco Keyboard
Any of the listed keyboards can be configured in victor.
Procedure 24-1 
Add an AD/Pelco Keyboard
Step Action
1 Select Keyboards from the Setup tab.
2 Select New from the dropdown.
3 Enter a name for the keyboard in the Name textbox.
4 Enter a description for the keyboard in the Description textbox.
Note
The Enabled checkbox is checked by default, deselect the checkbox to deactivate
the keyboard.
5 Expand the Keyboard section.
a Select the required Model from the dropdown.
b Select the required COM Port from the dropdown.
c Select the required BAUD Rate from the dropdown.
6 Select Save.
- End -