Specifications

Video Wall
151
Configure Client to Client Communication (Displays)
You can Turn off Client to Client communication for individual displays.
When selected, this option rejects all client to client requests automatically. The sender is informed
that the receiver is configured to reject the request and asked whether to force it. In this case the
receiver is asked whether to accept the request and is presented with a Yes/No dialog.
The sending workstation is informed if a receiving workstation is in Reject mode in two ways:
• A Rejecting’ dialog displays next to the display when attempting to send
• The receivers display name highlights red, indicating client to client communication is turned of
for that display
Procedure 23-2 
Configure display client to client settings
Step Action
1 Select next to Workstations in the Device List. All workstations are listed.
2 Select next to the workstation which is attached to the display to be edited.
3 Select next to Monitors.
4 Right click the display to be edited.
5 Select Edit. The display editor opens.
6 Expand the Client to Client Communication section.
7 Select/Deselect the Turn off Client to Client Communication checkbox as required.
8 Select Save.
- End -