Specifications

Video Wall
150 victor 4.4 Installation and Configuration Guide
Procedure 23-1 
Configure Client to Client Communication
Step Action
1 Select Devices from the Home tab. Device List displays.
2 Select next to Workstations in the Device List. All workstations are listed.
3 Right Click on the workstation to be edited.
4 Select Edit. Workstation editor displays.
5 Expand the Client to Client Communication section.
6 Select or Deselect the Checkboxes as required to configure the workstation.
7 Select Save.
- End -
Turn Off Client to Client Communication This controls whether a workstation automatically
accepts or rejects requests. When selected,
receiving workstations will not automatically accept
components.
Instead, the sender is informed that the receiving
workstation is configured to reject and asked
whether to force the component.
If the component is forced, the receiver is asked
whether to accept the request and select Yes or
No.
The Sending workstation is informed that the
receivers client to client communication is turned off
in 2 ways:
• A Reject Dialog displays when attempting to
send.
• Receiver’s Name highlights Red.
Default is Off
Maximize on Primary Monitor This controls whether a received component
displays Full Screen.
Default is On
Agent When Using the Send To feature, users need to
navigate to displays via their attached workstations.
Configuring a workstation as an Agent means the
displays attached to the workstation appear as local
displays in relation to sender’s workstations so the
workstation level is avoided.
Default is Off