Specifications

Object Association
106 victor 4.4 Installation and Configuration Guide
With Object Association, the Review feature launches investigator mode and displays all
associated camera views.
3 Similar to 1 and 2 but related to Non Video devices E.G. Doors. If a door is forced and an
event activated, the feature can be used to view video from associated cameras in the
door’s vicinity.
Review Feature
The Review option is exposed in 3 areas of the client:
• Reports: When associations are configured, the source can be accessed from report items by
selecting Review in the item’s context menu.
• Event Viewer: When associations are configured, behavior is similar to that of Reports but the
source is the cause of the event. The source can be accessed by selecting Review in the
context menu of the Event Viewer item.
• Activity List: When associations are configured, the source of the activity list items can be
accessed by selecting Review from the context menu of Activity list items.
Create Object Associations
You can associate a maximum of 5 objects with any of the classes listed:
This procedure describes how to associate a video camera with other video cameras.
Procedure 15-1 
Create Object Associations
Step Action
1 Select Devices from the Home tab. Device list displays.
2 Select next to Recorders to expand the selection.
3 Select next to the specific recorder.
4 Right click the camera to be edited.
5 Select Edit. Camera editor displays.
6 Expand the Associations section.
7 Select . Object selector displays.
8 Select the object to associate using the object selector.
9 Select OK.
Video Cameras DSC Partition/Zone
Doors MZX Panel/Point
Inputs/Outputs Simplex 4100 Panel/Point
Readers Salvos