Specifications

Maps
102 victor 4.4 Installation and Configuration Guide
Field of View
A Field of View (FoV) can be attached to a camera icon on a map. FoV gives an indication of the
area covered by a camera.
Procedure 14-11 
Attach Field of View to Camera Icon
Step Action
1 Select Maps from the Build tab
2 Select Show All
3 Right Click the map to be edited
4 Select Edit. Map editor opens
5 Right click on the camera icon you wish to attach a FoV to
6 Select Field of View (FoV)
7 Select Add. The FoV editor opens
8 Edit FoV Angle value by selecting to increase or to decrease. You can also free
type in the Angle field
9 Edit FoV Rotation value by selecting to increase or to decrease. You can also free
type in the Rotation field
10 Edit FoV Scale value by selecting to increase or to decrease. You can also free
type in the Scale field
11 Select OK to apply
12 The FoV can be further manipulated by right clicking and selecting from:
• Show FoV Control Window
• Annunciate with active alert (FoV will only annunciate if icon is set to Strobe,
Pulse, Blink Fade or Flash)
• Hide this FoV drawing
• Remove this FoV drawing
• Send to back
• Bring to front
• Move shape when icon is moved
13 Select Save
- End -