Specifications

Maps
94 victor 4.4 Installation and Configuration Guide
Importing Map Images
To store an image file on the database, you need to import and save an image file. These
procedures describes the basic steps to import and save an image file as a Map. The map then
needs to be configured.
Procedure 14-1 
Import a Map Image
Step Action
1 Select Maps from the Build tab.
2 Select New from the dropdown menu. New Map editor displays.
3 Enter a name for the map in the Name textbox.
4 Enter a description for the map in the Description textbox.
5 The Enabled checkbox is selected by default, deselect to disable the map.
6 Select . Select Drawing File dialog displays.
7 Select . Browse window displays.
8 Browse to and select the required image file.
9 Select Open.
10 Select Import. File imports and displays in map editor.
11 Select Save.
- End -
Procedure 14-2 
Export CAD File
A CAD file (.dwg or .dxf) can be exported from victor as a .jpg file. This enables CAD files to be
exported, edited as required then imported for use as a map.
Step Action
1 Select Maps from the Build tab.
2 Select New from the dropdown menu. New Map editor displays.
3 Enter a name for the map in the Name textbox.
4 Enter a description for the map in the Description textbox.
5 The Enabled checkbox is selected by default, deselect to disable the map.
6 Select . Select Drawing File dialog displays.
7 Select . Browse window displays.
8 Browse to and select the required CAD file.
9 Select Open
10 Select Export to File. Save As dialog opens