Specifications

Clips
84 victor 4.4 Installation and Configuration Guide
Vault, Save and Export Clips
Once a clip has been created, it can then be vaulted, saved, exported or archived from the Direct
Clip Action dialog. For more information on creating a clip, refer to
Clip Creation. Additionally,
clips that have previously been created and saved can then be exported.
Vault Clips
Vaulting a clip tags it as protected, preventing it from data culling.
Note
Vaulting is only supported on VideoEdge NVR 4.2+ recorders.
Procedure 13-2 
Vaulting a Clip
Step Action
1 Create a clip using Procedure 13-1 Create a Clip. Direct Clip Action dialog displays
2 Select Vault. Progress bar displays showing progress of vaulting
3 Vaulting Complete message displays
- End -
Save Clips
By default, clips are saved locally to C:\ProgramData\American Dynamics\victorclips. This location
can be changed in System Values where Remote Directories can also be specified.
Procedure 13-3 
Saving a Clip
Step Action
1 Create a clip using Procedure 13-1 Create a Clip. Direct Clip Action dialog displays
2 Select Save. Saving location options display
3 Edit the clip name by selecting the Clip Name textbox and entering text as required
4 If required, enter notes in the Notes textbox
5 Select Local or Remote as Clip Saving Location
6 Select a clip folder to save to
7 Select Save. Progress bar displays showing progress of saving
8 Saving Complete message displays
- End -