Specifications

SECURITY CAMERA SYSTEM UPGRADE AND REPLACEMENT
FOR MONTGOMERY COUNTY DETENTION CENTER
SECURITY CAMERA SYSTEM 17000-95
F. The housing and bubble shall have an Effective Projected Area (EPA) of
approximately 125 square inches.
G. The entire dome and housing will operate from a Class 2 power source requiring
no more than 80 VA of power. The dome and housing shall be tolerant of 24
VAC supply voltages from 20 VAC to 36 VAC at 50/60Hz and be installed in
accordance with Class 2 requirements.
H. The housing must include an integral twist-lock I/O board to facilitate quick
connect/disconnect of the dome from the housing. The housing shall incorporate
“Euro-style” terminal screw connectors for ease of connection, and internal LEDs
to verify proper power and communication status. The housing must provide four
alarm inputs for use as alarm contacts and a Form C output rated at 30 volts AC
or DC, 1 amp. The housing must provide for lightning and surge protection of
the video, power, and communication lines.
I. The housing must offer a choice of either a clear bubble with no light loss or a
tinted bubble with a light loss of ƒ1.0 or less. The bubble must be sealed with
a gasket and secured with tamperproof screws. The appropriate security
screwdriver bit must be provided with the housing.
J. The housing shall be an American Dynamics RHODUL Series Outdoor Housing
or equivalent.
K. Minimum Performance Specifications: The dome shall meet the following
minimum operating requirements:
1. Mechanical:
Construction:
Enclosure Aluminum
Sun Shade/
Trim Ring/Top Cover UV stabilized, polycarbonate
Color Light gray
Height: 321 mm (12.64 in)
Diameter: 244 mm (9.61 in)
Bubble: Acrylic
Bubble Diameter: 75.3 mm (6.93 in)
Weight:
Without Dome 2.6 kg (5.72 lbs)
With Dome 3.8 kg (8.36 lbs)
Shipping Weight: 3.3 kg (7.26 lbs)
Mechanical Connection 1.5 in NPT
Mounting Options: Outdoor Pendant Mount
Outdoor Pole Mount
Outdoor Over-the-Roof Mount
Outdoor Wall Mount
Corner Mount