Specifications

SECURITY CAMERA SYSTEM UPGRADE AND REPLACEMENT
FOR MONTGOMERY COUNTY DETENTION CENTER
SECURITY CAMERA SYSTEM 17000-87
F. Each model must include a detachable base and VESA compliant mounting
holes. In addition, VESA compliant mounting accessories must be available to
mount the LCD monitors in rack, wall or pole applications.
G. The monitor must include a universal power supply, allowing it to be compatible
with a voltage range of 100 - 240 VAC (50/60 Hz). Power consumption must not
exceed 45 watts.
H. The LCD monitors must be shipped with both North American NEMA 5-15P and
Continental European CE 7/7 power cords terminating in a standard IEC320
configuration.
I. The monitor must contain a latching power switch which remains in the set
position, either on or off, regardless of incoming power status. This means that
the unit does not have to be physically turned back on after a power loss.
J. The LCD monitor shall provide on-screen display (OSD) for adjusting monitor
settings including brightness, contrast, auto adjust, phase clock, horizontal
position, vertical position, sharpness, and color temperature.
K. The monitor must be able to operate to full specifications within the normal
temperature range of 10º to 40º C (50º to 104º F) and a storage temperature
range of -20º to 60º C (-4º to 113º F).
L. The LCD monitor shall be an ADMNM1LCD series or equivalent.
M. Minimum Performance Specifications: The LCD monitor must meet the
following requirements:
1. General
LCD Panels: Active matrix TFT
Pixel Pitch 0.264 (H) x 0.264 (V) mm
(ADMNM1LCD17)
0.297 (H) x 0.297 (V) mm
(ADMNM1LCD15)
Viewing Angle ±75º (H) ±70º (V) (ADMNM1LCD17)
±60E (H) ±60º (V) (ADMNM1LCD15)
Viewing Area 338 (H) x 270 (V) mm (ADMNM1LCD17)
304 (H) x 228 (V) mm (ADMNM1LCD15)
Color 16.7 million (max)
Brightness 430 cd/m2 (ADMNM1LCD17)
250 cd/m2 (ADMNM1LCD15)
Contrast 400:1 (ADMNM1LCD17)
300:1 (ADMNM1LCD15)
Resolution 1280 x 1024 (ADMNM1LCD17)
1024 x 768 (ADMNM1LCD15)
Tilt: -5Eto 20E
Response Time: 25 ms (Tr+Tf) (typical)