Specifications

SECURITY CAMERA SYSTEM UPGRADE AND REPLACEMENT
FOR MONTGOMERY COUNTY DETENTION CENTER
SECURITY CAMERA SYSTEM 17000-82
Bubble Options (for Top Hat Mount):Clear (f0)
Smoked (f1.0)
Silver (f2.0)
Gold (f2.0)
Weight (Housing and Eyeball): 1.09kg (2.40 lbs)
Weight (Base with I/O board): 0.16kg (0.35 lbs)
4. Electrical
Input Voltage: 18 to 30Vac, Class 2 LPS
Design Tolerance: 16 to 36Vac
Line Frequency: 50/60Hz
Power Consumption: 11W maximum
Power-on In-rush current: 1.5A
Allowable Drop-out: 100µs
Surge Protection:
Video: Low-capacitance Zener suppressor of 6.5V,
1500W
SensorNet/Manchester: Isolation transformer coupled, 2000Vrms;
PTC resettable fuse protects transformer;
9.8V, 1A, 500W; 8/20µs impulse
RS–422/RS–485: 10kA impulse rated gas tube
Alarm Input/ Auxiliary Output: TVS rated at 9.8V, 1A, 500W,
8/20µs impulse
Power Line: TVS rated at 60V, 250A, 1.5 joules; 8/20µs
impulse
5. Camera and Lens
Imager: ¼-inch interline transfer CCD
Lens: 4-88 mm, F1.6, with manual iris override
Scanning System: . 2:1 interlace
Optical Zoom: 22X
Digital Zoom: 11X
Maximum Zoom: 242X
Synchronization: Phase adjustable line-lock
S/N Ratio: >50 dB (typical)
Gain Control: Automatic (AGC)
White Balance: Through-the-Lens (TTL)
Automatic Tracing White Balance (ATW)
NTSC:
Effective Pixels: 768 (H) x 494 (V)
Scanning: 525 lines, 60 fields, 30 frames
Horizontal: 15.734kHz
Vertical: 59.94Hz
Shutter Speed (Auto/Manual): 1/2 to 1/30,000
PAL:
Effective Pixels: 752 (H) x 582 (V)