Specifications

SECURITY CAMERA SYSTEM UPGRADE AND REPLACEMENT
FOR MONTGOMERY COUNTY DETENTION CENTER
SECURITY CAMERA SYSTEM 17000-71
H. The camera must have a signal to noise ratio of 50dB or better.
I. The camera must provide dip switch settings to simplify installation without
accessing programming menus.
J. The camera must have a LED on the rear panel to indicate power
K. The camera body must have embedded provisions to mount a ¼” x20 thread on
either the top or bottom without having to relocate a mounting shoe.
L. The camera shall be powered by either 24VAC(+33%, -15% – 60Hz NTSC /
50Hz PAL) or 12VDC(+15%, -10%)
M. The camera shall be an American Dynamics ADCA470CAFN (NTSC),
ADCA470CAFP (PAL), or equivalent.
N. Minimum Performance Specifications: One-third inch high-resolution color digital
CCD camera shall meet the following operating requirements:
1. Operational
Imager: Interline transfer 1/3-inch CCD array
Video Output: 1.0 Vp-p / 75 Ohm, composite
Active Pixel Count
NTSC: 768 (H) x 494 (V) pixels
PAL: 752 (H) x 582 (V) pixels
Minimum Scene Illumination: 0.7 lux (F1.2 lens)
Horizontal Resolution: 470 lines
Light Compensation Modes: Automatic electronic shutter, On/Off
NTSC: 1/60 - 1/100,000 sec.
PAL: 1/50 - 1/100,000 sec.
Auto Iris Drive: DC or EE-type, auto sensing
Backlight Compensation: 7 zones, selectable
Aperture Correction: Yes
Synchronization Modes: Internal or Line-lock with 360°
phase adjustment
White Balance: Auto or Manual Modes, 2500°~9600°K
Geometric Distortion: None
S/N Ratio: 50 dB
2. Controls
Night-Saver™ (Nite-SVR): On/Off
DVR-Saver™ (DVR-SVR): On/Off
Backlight compensation
(BLC1, BLC2, BLC3): 3 switches, 7 zones, On/Off
Automatic Gain Control (AGC): On/Off
Automatic Electronic Shutter (AES): On/Off
Synchronization (SYNC): Internal/Line Lock