Specifications

SECURITY CAMERA SYSTEM UPGRADE AND REPLACEMENT
FOR MONTGOMERY COUNTY DETENTION CENTER
SECURITY CAMERA SYSTEM 17000-63
3. A menu feature shall display or hide Overlay Video Information for
currently displayed live or recorded video.
AA. The software accessory shall provide menu features to activate functions of the
device.
1. A menu feature shall provide for retrieving alarms by instrument,
cameras, time and date.
2. A menu feature shall provide for retrieving video by instrument, camera,
time and date with or without text and/or audio information.
3. A menu feature shall provide for refreshing communications to those
remote instruments listed in the remote instruments setup list.
4. A menu feature shall provide for retrieving an instrument status when an
instrument is selected.
5. A menu feature shall provide for displaying of live video when an
instrument is selected.
AB. The software accessory shall provide menu features to configure the device.
1. A menu feature shall provide a complete list of settings and functions for
each Intellex that can be remotely configured based on each remote user’s
access PIN. Functions include schedule setup, motion detection filter
setup, images per second (ips), resolution setup, gain control setup,
camera name and setup, storage, archive schedule, alarm setup, and frame
rate control.
2. A menu feature shall provide for automatic frame rate selection or per
camera frame rate selection. Auto rate mode shall enable all cameras to
receive equal amounts of the total record rate capacity. Per camera frame
rate mode shall allow the user to select the rate for each connected
camera, with no individual camera able to record faster than 30 ips.
3. A menu feature shall provide for master timekeeping for all Intellex
instruments and associated software devices on the network. If any
messages are returned, they shall be displayed.
4. A menu feature shall allow the operator to set the display configuration.
5. A menu feature shall allow the operator to access the remote instruments
setup list, where instruments can be added, deleted and edited by their
name, IP address, communication ports and type.
6. A menu feature shall provide for editing the device communication port.