Specifications

SECURITY CAMERA SYSTEM UPGRADE AND REPLACEMENT
FOR MONTGOMERY COUNTY DETENTION CENTER
SECURITY CAMERA SYSTEM 17000-36
1. Division 17 Subcontractor shall develop software as required to affect the
functions of the system as dictated by the drawings and specifications.
2. Division 17 Subcontractor shall configure equipments with modules as
required for the system to support the specific functions or applications.
3. Division 17 Subcontractor shall provide equipment cabinets (if needed)
for installation of the control equipments and cable terminations to the
equipments.
4. Division 17 Subcontractor shall be responsible to ensure that the power
source for the PLC and operator terminals is from a UPS unit.
5. Ensure millwork is adequately ventilated for console mounted equipment.
Provide exhaust fans in each console section.
6. Coordinate all casework requirements with casework contractor.
N. Completion: Division 17 Subcontractor shall inspect and test the installation and
operations of the entire system prior to initiating acceptance tests.
6. MODULAR SCALABLE VIDEO MATRIX SYSTEM
A. Description: Modular and scalable microprocessor-based video switcher/controller
for up to 3200 video inputs and up to 256 video outputs, with the capability for
satellite switching systems of up to 38,528 video inputs by 256 video outputs.
B. Full Integration and Control:
1. The matrix switcher/controller system must provide full integration of
video switching and control of camera sites having fixed or variable
speed pan/tilts or domes. The integration must be automatic where
selection of camera site control must follow video switching.
2. The matrix switcher/controller system must be completely modular in
design, thus providing easy expansion and servicing. The system must be
provided prepackaged in any combination of 16 video input and 4 video
output increments.
C. Non-Volatile Memory:
1. All configuration and user programmed information must be held in non-
volatile memory to prevent mechanical problems associated with
continuous access of information from disc drives and the like.
2. Retention of all user-programmed information must not be affected by
power loss and the system shall “reboot” automatically and function
normally upon restoration of power.