Specifications

SECURITY CAMERA SYSTEM UPGRADE AND REPLACEMENT
FOR MONTGOMERY COUNTY DETENTION CENTER
SECURITY CAMERA SYSTEM 17000-28
g. Note: This project is an addition to an existing security network.
For this reason, the CCTV cameras control screens on 8 existing
projects will need to be edited to include CCTV control for the
new cameras installed along with the new CCTV controls in the
new Wonderware projects. Additionally, the existing PLC logic
will need to include the new CCTV cameras where needed.
6. Dedicated Intercom System:
a. The existing intercom systems shall be utilized by the new
Wonderware touch screens where specified.
7. Control Consoles:
a. Control consoles and cabinets shall be furnished by the Division
17 Contractor and the casework contractor in each control area for
mounting CCTV monitors, control and communicator panels,
intercommunication equipment, and miscellaneous alarms and
controls, as shown on the plans.
b. Consoles shall consist of bench frames with turrets or turrets only
as shown on the drawings.
c. Equipment installed in each console shall be located for access
from the front for maintenance functions.
d. Division 17 Contractor to furnish and install control panels in each
console and furnish detailed information as required for console
fabrication.
e. Division 17 Contractor to furnish and install panel-mounting
hardware, blank panels, and trim strips.
f. All console panels and devices shall be color coordinated and
mounted so as to not extend above any other panel or turret.
8. Control Panels:
a. The existing control panels in the security equipment room will be
re-used where possible. New cabinets will be provided by the Div.
17 contractor where needed.
b. The new CCTV cameras will be connected to the new and/or
existing matrix to provide and integrated CCTV system. The Div.
17 contractor must determine whether the existing switch can be
re-used.
c. The new Wonderware projects shall effect an integration of
associated functions which are required for an operator to