Specifications

SECURITY CAMERA SYSTEM UPGRADE AND REPLACEMENT
FOR MONTGOMERY COUNTY DETENTION CENTER
SECURITY CAMERA SYSTEM 17000-14
3. Manufactured Products:
a. Materials and equipment furnished shall be of current production
by manufacturers regularly engaged in the manufacture of such
items, for which replacement parts are available.
b. When more than one unit of the same class of equipment or
material is required, such units shall be the products of a single
manufacturer.
4. Equipment Assemblies and Components:
a. All components of an assembled unit need not be products of the
same manufacturer, however, all components must be acceptable
to the Engineer.
b. Manufacturers of equipment assemblies, which include components
made by others, shall assume complete responsibility for the final
assembled unit.
c. Components shall be compatible with each other and with the total
assembly for the intended service.
d. Constituent parts which are similar shall be the product of a single
manufacturer.
e. Moving parts of any element of equipment of the unit normally
requiring lubrication, shall have means provided for such
lubrication, and shall be adequately lubricated at the factory prior
to delivery.
5. All factory wiring shall be identified on the equipment being furnished
and on all wiring diagrams.
6. When factory testing is specified:
a. The Engineer shall have the option of witnessing factory tests. The
Contractor shall notify the Engineer a minimum of 15 working
days prior to the manufacturer's making the factory tests.
b. Four copies of certified test reports containing all test data shall
be furnished to the Engineer prior to final inspection and not more
than 90 days after completion of tests.
c. When equipment fails to meet factory test and reinspection is
required. The contractor shall be liable for all additional expenses.