Specifications

SECURITY CAMERA SYSTEM UPGRADE AND REPLACEMENT
FOR MONTGOMERY COUNTY DETENTION CENTER
SECURITY CAMERA SYSTEM 17000-8
5. Division 16 contractor responsibilities shall include the following:
a. All conduit systems shall be furnished and installed by the
Division 16 Contractor, in accordance with the Division 17
specifications. Division 16 Contractor shall be responsible for
ensuring that adequate conduit facilities are installed to support the
intended functions of Division 17.
b. Install any new cabinets required by the Division 17 contractor.
c. All conduit must be labeled as to destination and provided with a
‘pull string’.
6. Division 17 Subcontractor Responsibilities shall include the following:
a. Connect all new and/or existing security equipment as required.
b. Provide all hardware and systems to control the new CCTV
cameras and new Wonderware HMI touch screens.
c. After installation, verify proper control operation of all systems.
N. Quality Assurance:
1. All equipment and materials required for installation under these
specifications shall be new (less than one (1) year from manufacturer) and
without blemish or defect. All equipment shall bear labels attesting to
Underwriters Laboratories approval where subject to Underwriters
Laboratories label service. Where no specific indication as to the type or
quality of material or equipment is indicated, a first-class standard article
shall be furnished. All manufacturers of equipment and materials pertinent
to these items shall have been engaged in the manufacture of said
equipment a minimum of three (3) years and, if so directed by the
Engineer, be able to furnish proof of their ability by submitting affidavits
and descriptive data on their product of size and magnitude comparable
to that specified herein.
2. Each major component of equipment shall have the manufacturers name,
address, model number and rating on a plate securely affixed in a
conspicuous place. The nameplate of a distributing agent will not be
acceptable. NEMA Code Ratings, UL label, or other data which is die-
stamped into the surface of the equipment shall be stamped in a location
easily visible. Performance as delineated in schedules and in the
specifications shall be interpreted as minimum performance. In many
cases equipment is oversized to allow for pickup loads which cannot be
delineated under the minimum performance.
3. All equipment of one type shall be the product of one manufacturer.