Specifications

SECURITY CAMERA SYSTEM UPGRADE AND REPLACEMENT
FOR MONTGOMERY COUNTY DETENTION CENTER
SECURITY CAMERA SYSTEM 17000-5
8. Include all items of labor and material required to comply with such
standards and codes. Where quantity, sizes or other requirements indicated
on the drawings or herein specified are in excess of the standard or code
requirements, the specifications or drawings, respectively shall govern.
K. Interpretation of Contract Documents:
1. This section of the specifications and related drawings describe general
provisions applicable to every section of Division 17.
2. Attention is directed to Instructions to Bidders and to Division 1, General
Conditions, which are binding in their entirety on this portion of the
work, particularly the paragraphs concerning materials, workmanship and
substitutions.
3. Mention in these specifications or indications and/or reasonable
implications on drawings, whereby articles, materials, operation or
methods related to execution of the electrical work are noted, specified,
drawn or described, thereby requires execution of each such item of work
and provision of all labor, materials, equipment, and appurtenances
required for execution thereof.
4. Particular attention is directed to the drawings and other contract
documents for information pertaining to required items of work which are
related to and usually associated with the work of this Division of the
specifications, but which are to be provided as part of the work of other
Divisions of the specifications, under the General Construction Contract.
5. No exclusions from, or limitations in, the language used in the drawings
or specifications shall be interpreted as meaning that the appurtenance or
accessories necessary to complete any required system or item of
equipment are to be omitted.
6. The drawings of necessity utilize symbols and schematic diagrams to
indicate various items of work. Neither of these have any dimensional
significance nor do they delineate every item required for the intended
installations. The work shall be installed, in accordance with the intent
diagrammatically expressed on the drawings, and in conformity with the
dimensions indicated on final working drawings and on equipment shop
drawings. No interpretation shall be made from the limitations of symbols
and diagrams that any elements necessary for complete work are
excluded. When abbreviations appear on the drawings or specifications in
lower case letters with or without periods, their meanings shall be the
same as stated above.
7. Certain details appear on the drawings which are specific with regard to
the dimensioning and positioning of the work. These details are intended