Specifications

SECURITY CAMERA SYSTEM UPGRADES AND REPLACEMENTS
FOR MONTGOMERY COUNTY DETENTION CENTER
ELECTRICAL 16000-8
6. Circuit numbering...
B. These prints shall indicate the location of all concealed water and electric
services, water piping, vents and other miscellaneous piping and services, by field
measured dimensions from readily identifiable and accessible walls, columns, or
corners of the building. The record set shall also include the updating of
equipment schedule sheets.
C. During the course of the project these prints shall be updated weekly and kept
clean and undamaged. They shall not be used for any purpose other than as
described above and shall be available at all times for inspection.
D. When the job is completed, these prints shall be submitted to the Engineer for
review and analysis before electronic updating is performed by the Engineer’s
office.
18. INSTRUCTIONS AND MANUALS
A. Provide four complete brochures in hard backed binders, each containing all
operating, servicing, and maintenance information as well as parts lists for all
equipment installed under this contract. Where diagrams are too large for the
binder, arrange manila pockets with reinforced holes to hold folded drawings.
The binder shall also contain a title sheet showing the Contractor's name and
address and an index sheet listing the contents of the manual. A copy shall be
submitted to the Engineer for verification prior to being submitted to the Owner.
B. Information shall be complete, indexed, and bound as described above. The
following shall be clearly printed on the front cover of the binder:
1. Project name, address and date.
2. Name and address of Architect-Engineer.
3. Section of Work covered, i.e., Electrical
4. Name and address of Contractor.
5. Telephone number of Contractor, including night or emergency numbers.
C. Incorporate, within the binders, individual sections containing an index sheet,
written operating instructions, shop drawings, equipment catalog cuts,
manufacturer's instructions, and a list of equipment into the binders.
1. First Page - Title of Job, Owner, Address, Date of Submittal, Name of
Contractor and Name of Architect-Engineer...Emergency operating
instructions and/or list of service organizations (including address and
telephone numbers) capable of rendering emergency service on 24 hour
calls shall be furnished.
2. Second Page - Index/Table of Contents
3. Third Page - Introduction to First Section...This shall contain a complete
written description of the system.