Specifications

SECURITY CAMERA SYSTEM UPGRADES AND REPLACEMENTS
FOR MONTGOMERY COUNTY DETENTION CENTER
ELECTRICAL 16000-7
13. SUPPORTING MEMBERS
A. Furnish and install all steel angles, channels, bars or clamps required to support
any type of permanent apparatus to be furnished and/or installed under this
section.
14. CLEAN UP
A. All rubbish resulting from the work herein specified shall be removed from the
premises as fast as it accumulates.
B. Upon completion of the work, remove from the project site all tools, equipment,
surplus materials and rubbish pertaining to the work under this contract heading.
Responsibility for this shall include paying all costs for such removal and
disposition including hauling, dumping, proper and legal disposal of hazardous
materials, etc.
15. MAINTENANCE OF EXISTING FACILITIES
A. Prior to the severing of the electrical service to any portion of the existing
building, submit a plan to the Architect and the Owner's Representative, stating
the nature and duration of the proposed interruption, as well as the method of
procedure. Do not under any circumstances proceed with an interruption of
service of any type without the Owner's written authorization.
16. WORK IN EXISTING BUILDING
A. All electrical items shown dotted and associated wiring and conduit, etc., located
in the remodeled portions of the existing building shall be disconnected and
removed and covered with a stainless steel plate as directed by the Engineer.
B. All cutting and patching of existing walls, floors and ceilings required for the
installation of any and all electrical work in the existing building shall be done
under this section. (See Item CUTTING AND PATCHING).
C. All electrical work to be installed in finished rooms of the existing building shall
be installed concealed unless otherwise noted on the drawings.
17. RECORD DRAWINGS
A. Provide and keep on the job site two complete print sets of the contract working
drawings on which shall be legibly recorded any variations or alterations from
such contract drawings made during construction. Record prints shall show
location of all piping system drains as well as changes in:
1. Size, type, capacity, etc., of any material, device or item of equipment...
2. Location of devices or equipment...
3. Location of outlet or source in building service systems...
4. Routing of building services...
5. Schedule data...