Specifications

Connection
䡵 System connection example
● Do not turn on the power of any component before all connec-
tions have been completed.
● Read the instruction manuals of the components to be connected
carefully.
Note:
• Genlocking is not possible with a signal containing too much
jitter, such as a VCR or videodisc playback signal.
Genlock connection
With some systems, genlocking by applying an external sync
input requires the horizontal phase (H PHASE) and/or color phase
(SC COARSE) (in case the external sync signal is a composite
video or black burst signal) to be adjusted.
Caution
• Be sure to observe the correct +, – polarity when connecting
a DC 12 V} power input.
• The DC 12 V} power should have a ripple voltage of no more
than 50 mV.
• Never connect the DC 12 V} and AC 24 V` power inputs
simultaneously.
• Be sure to attach the provided ferrite core to the lens cable or
power cable to be connected with this camera. (see page 17
for details)
13
VIDEO GND + 9 V
1
+
2 –
AC 24V
DC 12V
CLASS 2 ONLY (For U.S.A use)
ISOLATED POWER ONLY (For EUROPEAN use)
SEE INSTRUCTION
MANUAL
CAMERA
SET UP
SYNC
IN
VIDEO
OUT
POWER
Y/C OUT
SET
VIDEO IRIS
To video input
connector
Auto-iris lens with built-in EE
amp (or auto-iris lens without
EE amp)
To VIDEO IRIS
(or to DC IRIS on side panel)
From composite video
or black burst output
connector
To DC12V or
AC24 V input
connector
Power supply
(DC 12 V})/(AC 24 V`)
Sync signal
generator
+ (DC12V})
– (DC12V})