Specifications

INSTALLATION AND SERVICE GUIDE
DeltaDome II Camera Dome
8000-2708-01, REV. B
33
Updating/Reprogramming
Dome Software
To update or reprogram dome software:
1. Remove flash memory chip.
Insert chip extractor tool into square access
hole and squeeze to extract flash memory chip
(Figure 36).
CAUTION: Electrostatic-sensitive device. Use a
ground strap when handling chip.
2. Reprogram chip or replace it with new chip.
3. Reinsert chip.
Align dot on chip with indent on socket, then
push down on chip to reinsert it.
Figure 36. Removing the flash memory chip