Specifications

INSTALLATION AND SERVICE GUIDE
DeltaDome II Camera Dome
8000-2708-01, REV. B
12
Indoor Installation
This section explains how to connect the housing
and eyeball assembly to a:
• ADPTB mounting base
• ADIOB mounting base.
Items You Will Need
You should have on hand the following
tools and parts:
G Install/Removal tool to attach and detach domes
and bubbles without a ladder from RUIOB
mounting bases.
G Base kit:
− ADIOB (base with I/O board), or
− ADPTB (standard base).
G Housing and eyeball assembly, 0100-2283-XX.
The -XX determines the type of camera used.
-25 = Color NTSC
-26 = Color PAL
-27 = Black and White EIA
-28 = Black and White CCIR
Other Preparations
To ensure a smooth and successful
installation, you must:
G Have electrical work comply with latest national
electrical code, national fire code, and all
applicable local codes and ordinances.
G Coordinate work with other trades to avoid
interference.
G Verify existing site conditions and coordinate
with the owner's representative and appropriate
utilities as required.
G Obtain copies of all related plans, specifications,
shop drawings and addenda to schedule and
coordinate related work.
G Thoroughly review the project to ensure that all
work meets or exceeds the above requirements.
Bring alleged discrepancies to the attention of
the CCTV Project Coordinator.