Product guide

SpeedDomes, Drones, Controllers & Accessories
23
—
24
2
O R D E R I N G O P T I O N S
1. EACH COMPONENT INDIVIDUALLY
camera module, mounting base, mount, housing and bubble.
or
2. A PRE-CONFIGURED DOME KIT, which includes the
following components:
 aCamera Module (Color with Day/Night mode)
 bI/O Board Mounting Base (if applicable)
 cMounts
1) Hard Ceiling, 2) 2'x2' Drop Ceiling or 3) Long Wall
 dHousings
1) Top hat housing for indoor applications
2) Environmental housing for outdoor applications
 eBubbles (smoked or clear)
A NOTE ABOUT THE DOME ASSEMBLY:
A dome assembly is comprised of two
individual components:
1. Camera Module
2. I/O Board
Mounting Base
We offer an I/O Board
Mounting Base which
makes installation as easy as
screwing in a lightbulb with
just three simple steps:
1) Connect the composite
cables for power, communication
and video to the I/O PC board
in the mounting base.
2) Secure the mounting base to
the ceiling or desired location.
3 & 4) Connect the housing
and eyeball assembly to the
base by aligning the cap and
base tabs, and then turning
the housing clockwise until you
hear a click. Once the housing
is secured, only the florescent
dot will be seen.
5) Dome is mounted and
ready-to-go. Wait a few
seconds for dome to begin
its homing routine. This
mounting base supports four
alarm inputs and three alarm
outputs.
SpeedDome Ultra 8
aCamera Module bI/O Board Mounting Base
cMounts
3) Long Wall (Outdoor)
2) 2' x 2' Drop Ceiling
(Indoor)
1) Hard Ceiling (Indoor)
dHousings
1) Top Hat (Indoor)
2) Indoor & Outdoor
eBubbles
Product offerings and specifications are subject to change without notice. Actual products may vary
from photos. Not all products include all features. Availability varies by region; contact your sales rep.
1
2
3
4
5
Smoked
Gold
*
Silver
*
Clear
* Indoor use only.