Installation manual

57
Installation Manual
Pearl River, NY, USA 15 September, 2000
Harold D. Johnson, Ph. D.
Director of Engineering
European Contact: Sensormatic France S.A.
7, rue Alexis de Tocqueville
Parc de Haute Technologie,
92183 ANTONY CEDEX
MegaPower 48+ Product Specifications
System Specification
Video Subsystem
Video Inputs .............................................. 48 inputs
Switched Outputs ...................................... 16 outputs
Video Text Overlays .................................. Standard on 8 Video Outputs
Video Bandwidth ....................................... + 10 Mhz (1 input to 1 output)
+ 8 Mhz (1 input to 16 outputs)
Frequency Response ................................ ±1.0dB, 0 to 6 Mhz
Signal to Noise Ratio ................................ -60 dB (Vpp vs Vrms)
Composite Output Voltage ........................ ≤ 0.5 dB
Average Output Voltage ............................ ± 250 mV
Cross Talk ................................................. Adjacent Channel: -55 dB typical at 3.58 to 4.43 Mhz
Input to Input: - 70 dB typical at 3.58 to 4.43 Mhz
Differential Phase...................................... ≤ 2.0 %
Differential Gain ........................................ ≤ 2.0 %
Using Pulse & Bar Generator
Field Tilt ..................................................... ≤ 2.0 %
Using Pulse & Bar Generator
Line Tilt ...................................................... ≤ 2.0 %
Using Pulse & Bar Generator
Gain .......................................................... Unity ± 1 dB
Return Loss (input/output) ........................ > 40 dB
Switching ................................................... Full Cross Point Matrix
Switching Time .......................................... < 20 milliseconds
Video Input Matrix
Cross Points .............................................. 48 inputs by 16 outputs
Input Impedance ....................................... 75 ohms terminated