Installation manual

44
MegaPower
TM
48+
secondary matrix must be connected to 8 video inputs on the primary matrix.
Eight full cross point switched monitor outputs are available by connecting monitors to video outputs 1-8 on the primary
matrix. Monitors can also be connected to monitor outputs 1-7 on each secondary matrix. These monitors can display
video inputs from that secondary unit only.
On all matrices, video output 16 is reserved for video-loss detection.
Mode 3: Primary Matrix with 4 Secondary Matrices
PRIMARY MATRIX
CONNECT MONITOR OUTPUTS 4-15
ON SECONDARY MATRIX A TO VIDEO
INPUTS 1-12 ON PRIMARY MATRIX
SECONDARY MATRIX A
MONITORS 1-12
(PORT REFS. X1-X12)
CAMERAS 1-48
(PORT REFS. A1-A48)
CAMERAS 97-120
(PORT REFS. X25-X48)
MONITORS 13-15
(PORT REFS. A1-A3)
SECONDARY MATRIX B
CAMERAS 49-96
(PORT REFS. B1-B48)
MONITORS 16-18
(PORT REFS. B1-B3)
CONNECT MONITOR OUTPUTS 4-15
ON SECONDARY MATRIX B TO VIDEO
INPUTS 13-24 ON PRIMARY MATRIX