Installation manual

43
Installation Manual
Mode 2 Configurations
Mode 2: Primary Matrix with 1 Secondary Matrix
Consult the figure below in order to connect video inputs and outputs to the system. Monitor outputs 4-15 from the
secondary matrix must be connected to video inputs 1-12 on the primary matrix.
Twelve full cross point switched monitor outputs are available by connecting monitors to video outputs 1-12 on the
primary matrix. Monitors can also be connected to monitor outputs 1-3 on the secondary matrix. These monitors can
display video inputs from that secondary unit only.
On all matrices, video output 16 is reserved for video-loss detection.
Mode 2: Primary Matrix with 2 Secondary Matrices
Consult the figure below in order to connect video inputs and outputs to the system. Monitor outputs 4-15 from each
secondary matrix must be connected to 12 video inputs on the primary matrix.
Twelve full cross point switched monitor outputs are available by connecting monitors to video outputs 1-12 on the
primary matrix. Monitors can also be connected to monitor outputs 1-3 on each secondary matrix. These monitors can
display video inputs from that secondary unit only.
On all matrices, video output 16 is reserved for video-loss detection.
Mode 2: Primary Matrix with 3 Secondary Matrices
Consult the figure below in order to connect video inputs and outputs to the system. Monitor outputs 4-15 from each
secondary matrix must be connected to 12 video inputs on the primary matrix.
Twelve full cross point switched monitor outputs are available by connecting monitors to video outputs 1-12 on the
primary matrix. Monitors can also be connected to monitor outputs 1-3 on each secondary matrix. These monitors can
display video inputs from that secondary unit only.
On all matrices, video output 16 is reserved for video-loss detection.
Mode 2: Primary Matrix with 4 Secondary Matrices
Consult the figure below in order to connect video inputs and outputs to the system. Monitor outputs 4-15 from each
secondary matrix must be connected to 12 video inputs on the primary matrix.
Twelve full cross point switched monitor outputs are available by connecting monitors to video outputs 1-12 on the
primary matrix. Monitors can also be connected to monitor outputs 1-3 on each secondary matrix. These monitors can
display video inputs from that secondary unit only.
On all matrices, video output 16 is reserved for video-loss detection.
Mode 3 Configurations
Mode 3: Primary Matrix with 1 Secondary Matrix
Consult the figure below in order to connect video inputs and outputs to the system. Monitor outputs 8-15 from the
secondary matrix must be connected to video inputs 1-8 on the primary matrix.
Eight full cross point switched monitor outputs are available by connecting monitors to video outputs 1-8 on the primary
matrix. Monitors can also be connected to monitor outputs 1-7 on the secondary matrix. These monitors can display
video inputs from that secondary unit only.
On all matrices, video output 16 is reserved for video-loss detection.
Mode 3: Primary Matrix with 2 Secondary Matrices
Consult the figure below in order to connect video inputs and outputs to the system. Monitor outputs 8-15 from each
secondary matrix must be connected to 8 video inputs on the primary matrix.
Eight full cross point switched monitor outputs are available by connecting monitors to video outputs 1-8 on the primary
matrix. Monitors can also be connected to monitor outputs 1-7 on each secondary matrix. These monitors can display
video inputs from that secondary unit only.
On all matrices, video output 16 is reserved for video-loss detection.
Mode 3: Primary Matrix with 3 Secondary Matrices
Consult the figure below in order to connect video inputs and outputs to the system. Monitor outputs 8-15 from each
PRIMARY MATRIX
CONNECT MONITOR OUTPUTS 4-15
ON SECONDARY MATRIX A TO VIDEO
INPUTS 1-12 ON PRIMARY MATRIX
SECONDARY MATRIX A
MONITORS 1-12
(PORT REFS. X1-X12)
CAMERAS 1-48
(PORT REFS. A1-A48)
CAMERAS 49-84
(PORT REFS. X13-X48)
MONITORS 13-15
(PORT REFS. A1-A3)