Installation manual

42
MegaPower
TM
48+
Mode 1: Primary Matrix with 3 Secondary Matrices
Consult the figure below in order to connect video inputs and outputs to the system. The 16 monitor outputs from each
secondary matrix must be connected to 16 video inputs on the primary matrix. Sixteen full cross point switched monitor
outputs are available by connecting monitors to video outputs 1-16 on the primary matrix.
PRIMARY MATRIX
CONNECT MONITOR OUTPUTS 1-16
ON SECONDARY MATRIX A TO VIDEO
INPUTS 1-16 ON PRIMARY MATRIX
SECONDARY MATRIX A
SECONDARY MATRIX C
CONNECT MONITOR OUTPUTS 1-16
ON SECONDARY MATRIX B TO VIDEO
INPUTS 17-32 ON PRIMARY MATRIX
SECONDARY MATRIX B
CONNECT MONITOR OUTPUTS 1-16
ON SECONDARY MATRIX C TO VIDEO
INPUTS 33-48 ON PRIMARY MATRIX
MONITORS 1-16
(PORT REFS. X1-X16)
CAMERAS 1-48
(PORT REFS. A1-A48)
CAMERAS 49-96
(PORT REFS. B1-B48)
CAMERAS 97-144
(PORT REFS. C1-C48)