Operator`s manual

TOUCH TRACKER Utilities 5-9
Toggling Automatic/Manual Alarm Acknowledgment
The default setting for the T
OUCH
T
RACKER
is to automatically clear alarms
after 60 seconds. You can, however, change this to have alarms manually
acknowledged by the system operators.
To toggle the Automatic/Manual Alarm Acknowledgment function, do the
following:
1. Press the
D
button.
If Automatic Alarm Acknowledgment is enabled, you will see the
following:
Auto Ack Alarm
If Manual Alarm Acknowledgment is enabled, you will see the
following:
Manual Ack Alarm
2. Press
D
again to change alarm acknowledgment to the preferred type.
3. Press the
Clear
button to return the LCD to camera control mode.