Operator`s manual

5-6 Operator’s Manual
IMPORTANT
The following procedure describes how to toggle the current Main and Call
T
OUCH
T
RACKER
s. Before you begin this procedure, you must know which
T
OUCH
T
RACKER
you want to designate the Main, and which one you want
as the Call. You can distinguish between the two T
OUCH
T
RACKER
s by
looking at their menus. The Main T
OUCH
T
RACKER
contains all of the menu
items, while the Call T
OUCH
T
RACKER
has a limited menu selection.
If you want to toggle the functionality of the T
OUCH
T
RACKER
s, first you
must do so on the current the Main T
OUCH
T
RACKER
.
1. On the Main T
OUCH
T
RACKER
, press the
Menu
button to display the
menu.
2. Scroll through the menu items and press the appropriate button—zoom
or focus—to select Tog Primary/2nd.
The LCD displays the following prompt:
Primary Unit
Change w <Next>
3. Press the
Next
button to designate this the Call T
OUCH
T
RACKER
.
4. Press the
Menu
button to exit the menu/programming mode on this
T
OUCH
T
RACKER
.
5. On the other T
OUCH
T
RACKER
, press the
Menu
button to display the
menu.
6. Scroll through the menu items and then press the appropriate button—
zoom or focus—to select Tog Primary/2nd.