Operator`s manual

Defining Automatic System Functions 4-17

3. When you have the perfect “starting point” picture displayed on the

monitor, press the

button.

The T

OUCH

RACKER

is now in the menu/programming mode, and the

menu appears:

Calibration

Define Sequence

4. Use the Tracker Ball to scroll through the menu selections until Record

Pattern is displayed.

Record Pattern

Alarm Actions

5. Press the appropriate button—zoom or focus—to select Record

Pattern.

The following prompt appears on the LCD:

Cam 3

Enter Patrn#?

IMPORTANT

The Auto Pan must be programmed for Pattern 1 only.

6. Press the number 1 on the keypad.

The following message appears on the LCD:

Record Pattern 1

Finish w <Next>

7. The Auto Pan is now being recorded. Any extraneous up or down

movement will be ignored when programming the Auto Pan.