Operator`s manual

About AD T

OUCH

RACKER

16 1-3

• The capability to display video from up to 16 cameras on one monitor

simultaneously in a 2x2 format, 3x3 format, or 4x4 format by using a

multiplexer

• The capability to single-handedly control a camera's panning and tilting

movements, as well as its zoom, focus, and iris commands

• An “Apple Peel” feature that allows a SpeedDome to run a default

pattern, providing you with complete video coverage of an area

• A SpeedDome “flip” feature that enables you to flip the SpeedDome

180° in the opposite direction it is currently looking

• The ability to define and display Quick Views, which are immediate

camera call-ups of pre-defined views, with automatic zoom and focus

• The ability to define and run Patterns, which comprise a sequential

series of pan, tilt, zoom, and focus movements from a single camera

• The capability to incorporate up to 16 of the pre-defined Quick Views

and Patterns in a Sequence, where the Quick Views and Patterns are

automatically displayed one after the other on the Main monitor

• The capability to toggle the state of up to 64 dome outputs which, if

hooked up through relays, can control lights, door locks, etc., via the

OUCH

RACKER

• The ability to define up to 64 different alarms; the alarms are triggered

by dome inputs, and they automatically call up a pre-defined Quick

View, Pattern, or fixed shot and/or initiate a dome output

• The ability to clear alarms via the Main T

OUCH

RACKER

; the system

can store up to four alarms at one time in its queue

• Utilities that can be accessed from the T

OUCH

RACKER

for the

following functions: reset the SpeedDome, swap the zoom and focus

buttons, calibrate the T

OUCH

RACKER

, select a language for the T

OUCH

RACKER

's LCD display, and designate the Main and Call T

OUCH

RACKER