Operator`s manual

A-2 AD168 System Operator’s Manual
Full-Scale Programming Defaults:
Note: Defaults marked by an asterisk (*) accessible only through S³ software
System Options
User IDs Disabled. No passcode entry required
Menu Callup No camera number defined
Messages All messages printed. No program monitor output
Time and Date Set to the time and date of the embedded system software
Ports
Baud Rate: 1200 bps (Ports 1-7) 38.4K bps (Port 8)
Port Use Keyboard (Ports 1-7) Terminal (Port 8)
System Tours*
Camera 0
Dwell Time 0
Preset 0
Auxiliary 0
Connect Next No
System Salvos*
Camera 0
Preset 0
Auxiliary 0
Connect Next No
Event Timers* All timers = 24:00. All alarm table entries = 0. No callups set
Alarm Contacts/Cameras* Contacts assigned in blocks of 180, up to 1024 contacts
Dwell Time 2
Preset 0
Auxiliary 0
Connect Next No
Alarm Contacts/Monitors* All positions set to “No”. No alarm contact / monitor association
Monitor Arming*
Arming Code Disarmed
Block 0
Monitor Status
Tour None
Tour Status Hold
Display Status. Titles, Date, and Time on.
Pseudo Numbers one-to-one correspondence with real camera inputs (1-180)
Titles (Cameras, Presets, Alarms) All titles blank
Users / Keyboards
Users: Priority level = 8. No passcodes
Keyboards Priority level = 8
Priority Levels Level = 1, all functions except Override set to Yes
Partitioning*
Keyboard/Monitor All positions set to “Yes”, access allowed
Keyboard/Camera View All positions set to “Yes”, access allowed
Keyboard/Camera Control All positions set to “Yes”, access allowed
Monitor/Camera All positions set to “Yes”, access allowed