Operator`s manual

2-10 AD168 System Operator’s Manual
Camera Lockout
Cameras can be “locked out” to prevent other keyboard operators from controlling their movements. If a
camera is locked out, other operators will be able to view the camera, but will not be able to control its
pan, tilt, zoom, focus, iris, preset, and auxiliary functions. When an operator calls a camera that has
been locked out, the word “LOCK” appears on the monitor’s status line.
An operator who has the same or lower priority level than the operator who locked the camera out,
cannot control the camera.
An operator with a higher priority level than the operator who locked the camera out, can gain control of
the camera.
To lock or unlock control access to a camera:
1) Call or hold the desired camera on the monitor under your keyboard control
2) Enter either of the following F1 code combinations:
“1 F1” to unlock the camera
“2 F1” to lock the camera