Technical data

Introduction
1Liebert
®
DataMate
™
1.0 INTRODUCTION
1.1 Designed to Match Computer and Electronic Equipment Needs—From Installation
to Operation
Installed on the floor or on the wall, Liebert DataMate Precision Cooling systems control the cooling,
humidity and air distribution required by sensitive electronic equipment. A range of sizes and
configurations is available to meet varying sites’ needs.
The Liebert DataMate is also easy to use. Advanced microprocessor technology allows easy, precise
control and menu-driven monitoring keeps you informed of system operation through the LCD
readout.
These features, combined with Emerson quality construction and reliable components, guarantee
satisfaction from installation through operation.
Liebert Precision Cooling
Liebert Precision Cooling systems are designed to control the environment required for computers
and other sensitive electronic equipment. The Liebert DataMate provides complete control on an
around-the-clock basis and the high sensible heat ratio required by sensitive electronic equipment.
Easy Installation
The Liebert DataMate is a split-system evaporator combined with a remote air-, water- or
glycol-cooled condensing unit or a close-coupled water/glycol-cooled condensing unit or is a
self-contained, chilled water unit.
Each split system has thermostat-type wiring to controls and condensing unit. System components
are pre-charged with refrigerant using quick-connect fittings and can be easily connected together.
Optional pre-charged line sets or sweat adapters for field refrigerant piping are available for remote
condensing units.
Easy to Service
The Liebert DataMate is designed for front service access. Routine maintenance and service can be
performed quickly and easily. Spare parts are always in Emerson inventory and available on short
notice.
Advanced Control Technology
A menu-driven microprocessor control system provides precise temperature and humidity control and
accurate alarm setpoints. Using touch-sensitive buttons, the wall-mounted monitor/control panel
allows you to select and display temperature and other monitored parameters.
High Efficiency
High sensible heat ratio, scroll compressor and precise microprocessor control allow the system to
operate efficiently.
Space Saving Design
Models available to fit any room without disrupting workstation layout. Requires 5 ft
2
(0.5m
2
) or less
of floor space or can be mounted on a wall.
Reliable
The Liebert DataMate installed base is a testimony to the system reliability.
Agency Listed
Standard 60Hz units are CSA certified to the harmonized U.S. and Canadian
product safety standard, CSA C22.2 No 236/UL 1995 for “Heating and Cooling
Equipment” and are marked with the CSA c-us logo.
CUS