Technical data

CHAPTER 3: GUIDED TOUR SMART CARD MANAGEMENT SYSTEM 2
63 Rev. B
3.3. Creating Setup Cards
Now that the database has been set up with all the necessary information
about our locations, the machines that will be used in them, and the
profiles of how these machines are to operate, the only step remaining to
begin operation is to program the machines.
To program the machines setup cards must be created.
3.3.1. Creating a CTS Setup Card
1. Click the CTS Cards tab in the main screen (Figure 3.16).
2. Click the Create Setup Card button.
Figure 3.16 Creating a CTS Setup Card
Click
here
Then
click
here