Technical data

CHAPTER 3: GUIDED TOUR SMART CARD MANAGEMENT SYSTEM 2
54 Rev. B
3.2.3. Profiles
Once Locations have been established and all Machine types have been
entered, profiles need to be defined before the machines can be
programmed. In the profile section of the database, information defining
pricing and other functions of the different machines is entered.
3.2.3.1. CTS Profile
Begin by defining the profile for the CTS. Notice that the profiles for the
two locations will be similar except for the deposit cost for the card and
the CTS cutoff value.
Set up the Huntington Woods CTS Profile with the following steps:
1. Click the CTS Cards tab in the main screen (Figure 3.9).
2. Click CTS Profile button (Figure 3.9).
Figure 3.9 Opening the CTS Profile Manager
Click
here
Then
click
here