Technical data

CHAPTER 2: GETTING STARTED WITH SMS2 SMART CARD MANAGEMENT SYSTEM 2
41 Rev. B
2.3.4. Keyboard Navigation
This manual will provide instructions for SMS2 using a mouse or another
PC pointing device. Since SMS2 uses standard Windows navigation
elements, keyboard navigation can also be used.
When working with the records in SMS2 the tab key is used to navigate
through the fields, options and command buttons within the record. The
space bar is used to enable or disable options and the Enter key is used to
activate a command button.
2.4. Working with Smart Cards
There are three different types of smart cards used in the Greenwald
Intellicard system. The primary difference between each one of these
cards is their memory capacity. The card types are as follows:
! User Card (256 Byte memory capacity)
! Management Card (1K memory capacity)
! 8K Management Card (8K memory capacity)
For certain card applications (Section 1.2.2), it is necessary to use a
specific card type to insure that there is enough memory for its assigned
functions. In other cases, more than one card can be used. When possible,
it is most cost-effective to use the lowest memory card.