Technical data

CHAPTER 2: GETTING STARTED WITH SMS2 SMART CARD MANAGEMENT SYSTEM 2
29 Rev. B
2.2.4. Starting SMS2 for the First Time
Once the software and hardware installation have been completed, follow
these steps to start the software:
2. Double click the SMS icon located on the desktop of your PC
(Figure 2.9). The Login window will appear.
3. Insert either a Greenwald Intellicard User or Management Smart
Card (Sections 2.4.1) into the PC reader. Be sure that the smart
chip is facing up and leading into the reader (Section 2.4.2).
4. Enter the 4-digit default PIN (Personal Identification Number), 1-
2-3-4, and click the Ok button to begin SMS2 (Figure 2.10).
Figure 2.10 Login Window
Tech Tip
If you find that SMS2 will not start or that the software does not recognize the PC
Reader, reboot your computer.
Enter the default
login PIN – 1-2-3-4
Click here to continue