Technical data

CHAPTER 2: GETTING STARTED WITH SMS2 SMART CARD MANAGEMENT SYSTEM 2
28 Rev. B
2.2.3. Hardware Installation
In order to operate SMS2, a Tritheim Smart Port Smart Card
Reader/Writer (PC Card Reader) must be installed. This reader must be
purchased with your other system components. Follow these steps for the
PC Reader installation:
1. Close all programs using the serial port connection you have
designated for use with the SMS2 PC Reader.
2. Plug the PC Reader’s 9-pin serial connector into the PC’s serial
connection.
3. Plug the PC Reader’s adapter between the PC’s PS2 keyboard or
mouse port and the PC.
Since the PC Reader driver installation has been completed during the
software installation process and SMS2 automatically searches all serial
and parallel ports for the reader, the installation process is now complete.
You are ready to begin using SMS2!