Specifications
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 8
The Vizi Roller Beam 2R is fully operational in three dierent mounting
positions, hanging upside-down from a ceiling, mounted sideways,
or set on a at level surface. Be sure this xture is kept at least 0.5m
away from any ammable materials (decoration etc.). Always use
and install the supplied safety cable as a safety measure to prevent
accidental damage and/or injury in the event the clamp fails (see next
page). Never use the carrying handles for secondary attachment.
Vizi Roller Beam 2R Mounting
When installing the unit, the trussing or area of installation must be
able to hold 10 times the weight without any deformation. When
installing the unit must be secured with a secondary safety attach-
ment, e.g. an appropriate safety cable. Never stand directly below the
unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculat-
ing working load limits, installation material being used, and perodic
safety inspection of all installation material and unit. If you lack these
qualications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.
Screw one clamp each via a M12 screw and nut onto the
Omega holders. Insert the quick-lock fasteners of the rst
Omega holder into the respective holes on the bottom of the
Vizi Roller Beam 2R. Tighten the quick-lock fasteners fully
clockwise. Install the second Omega holder. Pull the safety-
cable through the holes on the bottom of the base and over
the trussing system or a safe xation spot. Insert the end in the
carabine and tighten the safety screw.
Vizi Roller Beam 2R Mounting
NOTICE: The suitable enviromental temperature for this light-
ing xture is between -25˚ C to 45˚ C. Do not place this lighting
xture in an enviroment where the temperatures are under or
above the temperatures stated above. This will allow the xture
to run at its best and help prolong the xture life.
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 9