Specifications

ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 35ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 34
Vizi Roller Beam 2R System Menu
Vizi Roller Beam 2R System Menu
2. Press the UP or DOWN buttons until “Test Channel” is displayed,
press ENTER.
3. Use the UP or DOWN buttons to scroll through the various chan-
nels.
4. Press ENTER or press MODE/ESC to exit.
Manual Control - With this function you can easily adjust the lamp.
All eects will be canceled, the shutter will open and output intensity
will be 100%. With the individual functions you can focus the light on
at surface (a wall) and nely adjust the lamp.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Eect Adjust” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Manual Control” is dis-
played, press ENTER.
3. Use the UP or DOWN buttons to scroll through the various func-
tions. Press ENTER when you nd the function you would like to
adjust.
4. Press ENTER or press MODE/ESC to exit.
Calibration - With this function you can calibrate and adjust the
eects wheels to their correct positions. The Calibration password
050.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Eect Adjust” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Calibration” is displayed,
press ENTER.
3. “XXXX” will be displayed. The password is 050.
4. Press ENTER to conrm or press MODE/ESC to exit.
USER MODE SET
User Mode -
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “User Mode Set” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “User Mode” is displayed,
press ENTER.
3. Use the UP or DOWN buttons to scroll through the 3 DMX Channel
Modes.
Standard Mode - This is 13 Channel Mode.
Basic Mode - This is 11 Channel Mode.
Extended Mode - This is 18 Channel Mode.
4. Press the MODE/ESC button once to return to the “User Mode
Set” menu. Use the UP or DOWN buttons to scroll through the Edit
modes. Press ENTER to select any of the Edit modes.
Edit User Mode – This function allows the user to make the actual
changes in the user dened modes that are created in the previous
function.
EDIT PROGRAM: - The xture comes equipped with a built-in DMX
recorder that allows custom programs to be installed and recalled
directly from the xture’s control board. Programs can be created
and stored using the xture’s control board or by using an external
DMX controller. For detailed instructions on how to complete this task
please see Section 12/ Page 39.
Select Program – This function allows the user to select one of ten
of the user dened built-in programs. This program is then accessed
in “Function Mode” under “Program Run.”
Edit Program – This function allows the user to edit the internal built-
in programs.
Edit Scenes – This function allows the user to edit or dene the
actual scenes that are stored in the user dened built-in programs
that are accessed in the previous step.