Specifications

ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 32
Vizi Roller Beam 2R System Menu
ADJ Products, LLC - www.adj.com - Vizi Roller Beam 2R Instruction Manual Page 33
Vizi Roller Beam 2R System Menu
2. Press the UP or DOWN buttons until “Reset Default” is displayed,
press ENTER.
3. Either “O” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
4. Press ENTER to conrm your selection or press MODE/ESC to
exit.
RESET FUNCTION
Reset All - With this function you can all the motors.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Reset Function” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Reset All” is displayed,
press ENTER.
3. Press ENTER to conrm your selection or press MODE/ESC to
exit.
Reset Pan & Tilt - With this function you can reset the Pan & Tilt
motors.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Reset Function” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Reset Pan/Tilt” is dis-
played, press ENTER.
3. Press ENTER to conrm your selection or press MODE/ESC to
exit.
Reset Colors - With this function you can reset the color wheel.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Reset Function” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Reset Colors” is displayed,
press ENTER.
3. Press ENTER to conrm your selection or press MODE/ESC to
exit.
Reset Gobos - With this function you can reset the gobo wheel.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Reset Function” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Reset Gobos” is displayed,
press ENTER.
3. Press ENTER to conrm your selection or press MODE/ESC to
exit.
Reset Shutter - With this function you can reset the shutter motor.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Reset Function” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Reset Shutter” is displayed,
press ENTER.
3. Press ENTER to conrm your selection or press MODE/ESC to
exit.
Reset Others - With this function you can reset all other motors.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Reset Function” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Reset Others” is displayed,
press ENTER.
3. Press ENTER to conrm your selection or press MODE/ESC to
exit.
EFFECT ADJUST
Test Channel - With this function you can test/correct each channel
function.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Eect Adjust” is highlighted, then
press ENTER.