Specifications

American DJ ® AUDIO • PRO MIX™ INSTRUCTIONS MANUAL • PAGE 9
SGL/CNT: This function allows you to select single or continuous play. Single play
will return a song to it's cue point when it has completely been played. Continuous
play will play the entire play list until the last song has completely been played.
TIME: The TIME button is used to change the display time values. Time can be dis
played as ELAPSED PLAYING TIME and song REMAINING TIME.
TEMPO LOCK: While this function is activated, all commands related to pitch (jog
wheel, pitch slider and pitch bend buttons) will not effect the actual tempo of the
song while keeping the perceived pitch constant.
3. From left to right, this set of buttons includes:
Back Skip: Use this function to go back to a desired track.
Forward Skip: To advance to the next track.
(+10) Button: This button is used to advance quickly ten tracks at the time. For
example, if you are on track 2, pressing the +10 button will advance to track 12.
4. Jog Wheel: The Jog Wheel has two functions depending on the mode you are working in:
a. The jog wheel will act as a slow frame search control when the panel is not play-
ing but either paused or set to a cue point. To set a new frame cue point, spin the
wheel then press PLAY when you have determined the proper position. Press CUE
to return to the "CUE POINT".
b. It also works as a pitch bend, when you turn clockwise the pitch will raise up to
16%, and when you turn counterclockwise it will fall to -16%.
5. From left to right, this set of buttons includes:
FLASH 1: Moves the cursor to the position that was previously stored for this
button through the "mem cue" function.
FLASH 2: Same as above.
FLASH 3: Same as above.
6. From left to right, this set of buttons includes:
IN/R. CUE: (CUE "ON THE FLY") This allows you to set a CUE POINT without stop
ping the play back. This button also sets the beginning of a seamless loop.
OUT/EXIT: Used to set the ending point when looping. When the Out/Exit button is
pressed, the player will play the loop continuously. To exit the loop, press the
Out/Exit button again.
RELOOP: If a SEAMLESS LOOP has been made, but the Player is not in SEAM
LESS LOOP mode, press the RELOOP BUTTON to activate the seamless loop
mode. RELOOP will appear in the Display Panel.
PRO MIX PLAYER CONTROLS AND FUNCTIONS - CONTINUED