Specifications

PRO MIX EFFECTS DETAILS - CONTINUED
Flange:
Flange is an echo effect in which the delay between the original signal and its
echo is very short and varies over time. The result is sometimes referred to as
a sweeping sound.
Parameters:
• Wet/Dry: Ratio of wet (processed) signal to dry (unprocessed) signal.
• Depth: Percentage by which the delay time is modulated by the low-frequen-
cy oscillator (LFO), in hundredths of a percentage point.
• Feedback: Percentage of output signal to feed back into the effect's input.
• Frequency: Frequency of the LFO.
• Delay: Number of milliseconds the input is delayed before it is played back.
• Waveform: Waveform of the LFO.
• Phase: Phase differential between left and right LFOs.
Echo:
An echo effect causes an entire sound to be repeated after a fixed delay.
Parameters:
• Wet/Dry: Ratio of wet (processed) signal to dry (unprocessed) signal.
• Feedback: Percentage of output fed back into input.
• Left Delay: Delay for left channel, in milliseconds.
• Right Delay: Delay for right channel, in milliseconds.
• Pan Delay: Value that specifies whether to swap left and right delays with
each successive echo.
Parametric Equalizer:
A parametric equalizer amplifies or attenuates signals of a given frequency.
Parameters:
• Center: Center frequency, in hertz.
• Bandwidth: Bandwidth, in semitones.
• Gain: Gain.
Reverb:
The reverberation effect is intended for use with music.
Parameter:
• In Gain: Input gain of signal, in decibels (dB).
• Reverb Mix: Reverb mix, in dB.
• Reverb Time: Reverb time, in milliseconds.
• HF Ratio:
American DJ ® AUDIO • PRO MIX™ INSTRUCTIONS MANUAL • PAGE 14
Note: To locate the effect’s display panel click on the blue button directly above
the effect bottom–see diagram at right. For more information see page 12.