Instruction manual

American DJ® - www.americandj.com - Performance Scan 250™ Instruction Manual Page 3
Micro-Stepping Motors for Smooth Color and Gobo Transitions
DMX-512 Protocol Compatible (Uses four DMX Channels)
Selectable 110v/60Hz or 230v/50Hz
6 Rotating Gobo Patterns Plus Spot
• 9 Colors Plus White
Master/Slave Operation
Internal Microphone
Variable Speed Strobe Function
• Gobo Shake
LED Display Menu
ZB-EHJ5 24v/250w Long Life Lamp
1 Year Warranty
Performance Scan 250 Features
The Performance Scan 250™ carries a one year limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
The R.A. number must be clearly written on the outside of the return
package. A brief description of the problem as well as the R.A. num
-
ber must also be written down on a piece of paper included in the
shipping carton. If the unit is under warranty, you must provide a copy
of your proof of purchase invoice. You may obtain a R.A. number by
contacting our customer support team on our toll free customer sup
-
port number. All packages returned to the service department not dis
-
playing a R.A. number on the outside of the package will be returned
to the shipper.
Performance Scan 250 Product Registration
American DJ® - www.americandj.com - Performance Scan 250™ Instruction Manual Page 4
To optimize the performance of this product, please read these operating
instructions carefully to familiarize yourself with the basic operations of
this unit. These instructions contain important safety information regard-
ing the use and maintenance of this unit. Please keep this manual with
the unit, for future reference.
Performance Scan 250 General Instructions
To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
Do not spill water or other liquids into or on to your unit.
Be sure that the local power outlet match that of the required volt-
age for your unit.
Do not attempt to operate this unit if the power cord has been
frayed or broken.
Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short.
Disconnect from main power before making any type of connection.
Do not remove the cover under any conditions. There are no user
serviceable parts inside.
Never operate this unit when it’s cover is removed.
Never plug this unit in to a dimmer pack
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
Do not attempt to operate this unit, if it becomes damaged.
This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
During long periods of non-use, disconnect the unit’s main power.
Always mount this unit in safe and stable matter.
Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the appliance.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 16 for cleaning details.
Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
Performance Scan 250 Safety Precautions