Instruction manual

American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 16American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 15
Accu Scan 250™ System Menu Accu Scan 250™ System Menu
ADDRESS MENU -
AOO1 - A511 (Value) - This is where you set the DMX address of
the unit.
TEST MENU -
T-01 - T-XX (Test) - Tests the functions of each channel. There
are eight channels, but only channels 1,2,3,4, and 6 can be
tested.
PLAY MENU -
RUN - Runs the unit as a “master” or in a stand alone mode. The
unit will run a internal program mode.
AUDI (Audio) - Runs the unit as a “master” or in a stand alone,
sound active mode.
AUTO - Runs the internal program.
RESE (RESET) MENU -
ALL - Resets all the motors in the unit.
SCAN - Resets the motors that control pan/tilt.
COLR (Color) - Resets the color motors.
GOBO - Resets the gobo motors.
SHTR - Resets the shutter motors.
TIME MENU -
LIFE - Displays the xtures total running time.
LAMP - Displays the lamp running time.
CLMP - Clears the lamp running time.
RPAN (REVERSE PAN) MENU -
ON/OFF - When “On” is chosen it will reverse the pan.
RTILT (REVERSE TILT) MENU -
0
ADDR
A001---Axxx
Indicate the staring DMX address
A001 also is the setting for slave
1
TEST
T-01~T-XX
Automatically test the function
RUN
MSTR/ALON
Runs fixture as “master” or “alone” for auto
AUDI
MSTR/ALON
Runs fixture as “master” or “alone” for audio
2
PLAY
AUTO
OFF/ RUN /AUDI
Runs fixture for no DMX
ALL
Reset all motors and returns fixture to home
SCAN
Reset only motors for pan/tilt
COLR
Reset only motors for colors
GOBO
Reset only motors for gobo and rotation
4
RESE
SHTR
Reset only motors for shutter and/or dimmer
LIFE
0000~9999
Displays the total fixture running time
LAMP
0000~9999
Displays a lamps running time
5
TIME
CLMP
Clear lamp running time
6
RPAN
ON/OFF
Reverses the pan movements
7
RTLT
ON/OFF
Reverses the tilt movements
10
MIC
M-XX
Mic sensitivity
VALU
D–XX D-00 (DXXX)
Display the DMX512 value of each channel
D ON
ON/OFF
Display turn off after 2mins
11
DISP
FLIP
ON/OFF
This function will reverse the display 180
RDMX
ON/OFF
Change DMX address via external controller
SPOT
ON/OFF
Lamp optimization
DFSE
ON/OFF
Resets all the fixture functions to default
VER
V1.0~V9.9
Software version
CODE
CXXX
Fixture code *code is “C050”
12
SPEC
ADJU
CH01~CH30
XXXX(-128~127)
Motor Calibration
STEP
S–01 ~S–48
Set the amount of your program
C–01~C–30
0 1 XX(00~FFH)
3 0 XX(00~FFH)
Edit the channels of each scene
TIME
T XXX(001~999)
Time for each scene
SCXX
CEDT
ON/OFF
Edit program via controller
REC.
RE.XX
Auto Save
13
EDIT
RUN
ON/OFF
Program test