Instruction manual

Accu Scan 250™ Controls and Functions

1. Mirror - This is a highly reective surface mirror specically designed

to optimize and enhance beam output. Never use glass cleaners that

contain ammonia to clean the surface of the mirror (such as Windex).

2. Lens Assembly - This high quality lens is a fully focusing. Focus

the lens by manually turning the lens in a clockwise or counter-clock-

wise direction until the desired effect is achieved.

3. Digital Display - This display shows the menu and operating func-

tions that you can choose from.

4. Mode/Esc Button - This button is used to enter the main menu and

submenus. It is also used to exit menus.

5. Up Button - This button is used to scroll forward when navigating

through the system menu.

6. XLR DMX Input Jack - This jack is used to receive an incoming

DMX signal or Master/Slave signal.

7. XLR Output Jack - This jack is used to transmit the incoming

DMX signal to another DMX xture, or transmit a Master/Slave signal

to the next Accu Roller 250™ in the chain. For best results in DMX or

Master/Slave mode terminate this jack if it is the last unit in the chain.

See “Terminator” on page 13.

8. Mini/C Controller Jack - This jack is for use with the optional Mini/

C controller only. Do not attempt to connect an audio signal to this

jack, this will damage the PC board and void your manufactures war-

ranty!

9. Lamp Assembly and Access Plate - This plate accesses the lamp

socket assembly. The unit includes a spring mounted ZB-MSD250

250w discharge lamp. Be sure to only replace with same type lamp.

After replacing a lamp be sure the lamp is centered in the reector.

See page 35-36 for details on installing and optimizing replacement

lamps. Never operate this unit with the lamp exposed, this lamp emits

strong UV radiation.

10. Power Cord Inlet & Fuse Holder

Power Cord Inlet - This unit is equipped with a removable I.E.C. power

cord. Be sure to only use the power cord included with the unit, this

cord is designed to match the electrical requirements of the unit. Other

American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 9

American DJ® - www.americandj.com - Accu Scan 250™ Instruction Manual Page 10

Accu Scan 250™ Controls and Functions

MI C